O-Rings - 10 Pack

€19.95*

Product number: NON-01-10059-0

O-Rings - 10 Pack

The NonPlus O-rings (10-pack) are specifically designed for the patent-pending self-adjusting bearing preload in our hubs.

They compensate for the pressure applied to the axle when the thru axle is tightened – ensuring an ultra-smooth ride without axial stress on the bearings. This extends bearing life and gives you more speed.

Thanks to their precise manufacturing, they play a crucial role in the performance and durability of your hub – especially when every watt and every detail counts.

Cutsomers also bought

High-speed seal for road bike or gravel - with sliding coating set with O-Ring

Optimize the performance and safety of your Taktik Racing or Nonplus Components road bike freehub with our upgrade product, specifically designed for dry conditions. Our high-speed seal, featuring an advanced low-friction coating and premium materials, is perfectly suited for dry riding environments and allows you to replace your existing seal with cutting-edge technology. The set includes an O-ring, which is essential for readjusting the bearing clearance if the original O-ring is damaged during the replacement process. This seal provides a noticeable improvement in the performance and reliability of your freehub, especially in dry conditions, ensuring you can rely on your gear at any speed. Choose quality and upgrade your freehub with the best component available.

€16.95*

High-Speed Bearing Set

With this bearing kit, you can restore your NONPLUS hubs to like-new condition. These bearings are designed for ultra-smooth rolling and maximum speed, achieved through slightly less sealing, making them ideal for primarily dry conditions. Please note that the bearings may wear out a bit faster in favor of their smoothness. If you’re looking for more durability, we recommend opting for the robust Enduro Bearings, which are especially suited for tough conditions. Included in the package: 5 x 6803RV 1 x Non+#2 17287-2RS NY

€49.95*

Bearing Remover - Tool for Removing Bearings

High-quality tool for removing the bearings from your hub. This tool is suitable for all bearings with an inner diameter of 17 mm.

€40.00*

End Cap Remover Tool - Tool for Removing the End Cap

If you want to modify or maintain your hub, this tool is essential. The work aid is screwed onto the end cap and allows you to remove it without leaving any marks on the hub. This practical tool can also be used to remove hub end caps with an outer diameter of 19 to 21 millimeters from other manufacturers.

€40.00*

Seal Tool - Tool for Installing the Sealing Ring

If you want to maintain your rear hub, this tool is essential. With the Seal Tool, you can effortlessly install the sealing ring between the freehub body and the hub body.

€30.00*

Customers have also seen

High-speed seal for road bike or gravel - with sliding coating set with O-Ring

€16.95*

C40 Road Wheelset Straight-Pull Center-Lock (CL)

The Carbon Wheelset C40 offers the perfect balance between aerodynamics and weight, ideal for road and cyclocross riders. With a rim height of 40 mm and a width of 28 mm, this wheelset, manufactured in Baden-Württemberg, delivers top performance. The tubeless-compatible clincher rims with asymmetrical drilling and a weight of only 385 g ensure optimal stiffness and stability. The hubs, featuring Center-Lock and Straight-Pull in matte black or matte gray, weigh a total of only 204 g and provide high flexibility with various freehub options (N3W, HG Road, XDR & MS). The wheelset supports a maximum tire pressure of up to 123 psi and a maximum system weight of 120 kg. Whether on the road or off the beaten path, the C40 Wheelset guarantees an outstanding riding experience.More technical details can be found here.

€2,198.00*

Non-Drive Side Front Hubs - End Cap Replacement Set

The End Cap Replacement Set - Non-Drive Side (left side) for Front Hubs is the perfect solution for precise maintenance and replacement on Centerlock rear hubs. The set includes an end cap, an O-ring (Compensation of bearing play tolerance), and three shims (spacers in sizes 0.1 mm, 0.15 mm, and 0.2 mm) for fine-tuning adjustments. The shims allow for accurate alignment, ensuring stable and reliable performance. Designed for use on the non-drive side, this set provides a precise and long-lasting solution for various hub applications.

€24.95*

Torque Cap Conversion Kit

This conversion kit includes everything you need to equip your NonPlus Components hub with Torque Caps: Included: • 2 Torque Caps • 3 Shims • 2 Seals Important Note: Torque Caps are specifically designed for certain suspension forks, such as those from RockShox. Please ensure that your fork is compatible with Torque Caps before purchase.

€54.95*

High-Speed Bearing Set

€49.95*

Enduro Bearing Set

With this Enduro Bearing Kit, you can bring your NONPLUS hubs to a new level of durability and resilience. These bearings are specifically designed for tougher conditions and extended lifespan. Featuring double-lip seals and a robust construction, they provide excellent protection against dirt, water, and other environmental factors, making them ideal for use in harsh conditions. Unlike the Highspeed Bearing Kit, which focuses on maximizing speed, this kit is built for strength and long-term stability. Contents: • 5 x Enduro Bearings 61803 LLU/LLB CN ABEC 5 Radial 17x26x5 • 1 x Non+#2 17287-2RS NY

€49.95*