Bearing Press Tool - Tool for Hub Service

€40.00*

Product number: NON-10-01-0006

If you want to modify or maintain your hub, this combination tool is essential. It allows for gentle pressing in of the hub bearings and can also be used for driving out 17 mm axles. This practical work aid is suitable for bearings with an outer diameter of 26 mm or 28 mm and an inner diameter of 17 mm.

Cutsomers also bought

Bearing Remover - Tool for Removing Bearings

High-quality tool for removing the bearings from your hub. This tool is suitable for all bearings with an inner diameter of 17 mm.

€40.00*

End Cap Remover Pro Tool

If you want to modify or maintain your NONPLUS hub, this tool is essential. The integrated striking pin allows for effortless removal of the end caps without damaging the hub. This versatile tool is also suitable for removing hub end caps with an outer diameter of 19 to 21 millimeters from other manufacturers.

€80.00*

Seal Tool - Tool for Installing the Sealing Ring

If you want to maintain your rear hub, this tool is essential. With the Seal Tool, you can effortlessly install the sealing ring between the freehub body and the hub body.

€30.00*

End Cap Remover Tool - Tool for Removing the End Cap

If you want to modify or maintain your hub, this tool is essential. The work aid is screwed onto the end cap and allows you to remove it without leaving any marks on the hub. This practical tool can also be used to remove hub end caps with an outer diameter of 19 to 21 millimeters from other manufacturers.

€40.00*

Mounting Block – Tool for Hub Assembly and Disassembly

If you want to modify or maintain your hub, this mounting block is essential. It offers two different fittings, allowing the tool to be used for both Centerlock and 6-bolt hubs. The work aid can be clamped in a vise, making the assembly and disassembly of hubs and wheels much easier.

€60.00*

High-Speed Bearing Set

With this bearing kit, you can restore your NONPLUS hubs to like-new condition. These bearings are designed for ultra-smooth rolling and maximum speed, achieved through slightly less sealing, making them ideal for primarily dry conditions. Please note that the bearings may wear out a bit faster in favor of their smoothness. If you’re looking for more durability, we recommend opting for the robust Enduro Bearings, which are especially suited for tough conditions. Included in the package: 5 x 6803RV 1 x Non+#2 17287-2RS NY

€49.95*

Customers have also seen

Bearing Remover - Tool for Removing Bearings

High-quality tool for removing the bearings from your hub. This tool is suitable for all bearings with an inner diameter of 17 mm.

€40.00*

Mounting Block – Tool for Hub Assembly and Disassembly

€60.00*

End Cap Remover Pro Tool

€80.00*

Seal Tool - Tool for Installing the Sealing Ring

If you want to maintain your rear hub, this tool is essential. With the Seal Tool, you can effortlessly install the sealing ring between the freehub body and the hub body.

€30.00*

End Cap Remover Tool - Tool for Removing the End Cap

€40.00*

Freehub Body Kit

Tooth disc + bearing + seal + end cap + 2x O-ring + spacers (0.1mm + 0.15mm + 0.2mm) The hubs set standards in terms of durability and weight. If the freehub’s splines wear out after prolonged use, you can find all the parts here to restore it to like-new condition. Of course, the kit is also suitable for changing the freehub standard, for example, when switching from SRAM XD to Shimano Microspline or vice versa.When choosing Highspeed bearings, you get minimal rolling resistance and maximum speed for dry conditions, while Enduro bearings are designed for maximum durability and load capacity under harsh conditions. Important information: The N3W and MS freewheels only fit the new axles. Please check which axle you have; you may need to order an additional axle. The old axles have a step. The diameter is slightly smaller. The new axles have a continuous diameter for freewheel bodies with 3 bearings.

€216.00*